Quikwriting is an alternate input method for handheld PDAs. Our initial implementations are for the PalmPilot, Palm III and Palm V. This page contains the release notes for Version 2.0. This version brings a number of major changes and improvements to Quikwriting, which now functions as a complete input system. To get to the main quikwriting page, click here.

This version makes much more extensive use of a calibrated plastic insert:

The insert contains two side-by-side virtual keyboards, an alpha keyboard ``a'' and a numeric keyboard ``n'':

While you read this document, you might want to open the Java emulator for QW2.0

All together, there are now 18 zones: 3×3 zones for each keyboard. In the discussion below, we use the following convention when naming the zones:

We can identify a stroke by its major and minor zones. For example, the stroke to draw the letter `s' goes from center to upper-left to upper-middle to center on the alpha keyboard. This stroke can be described by `1_a2_a'.

The major and minor zones can be the same. For example, the stroke to draw the letter `n' goes from center to upper-right to center on the alpha keyboard. This stroke can be described simply by `3_a'.

New features:

• Much faster recognizer logic

• Palm shortcuts work now. Draw the Palm shortcut character via stroke 2_a4_a or stroke 2_n4_n. Edit or add to Palm shortcuts in the usual manner, by going into the Prefs application, and selecting shortcuts in the pulldown menu.

• The Command stroke now works in Quikwriting. Do the Command stroke the same way as with Graffiti (pen down in lower left, then stroke 45 degrees up and to the right, then pen up). Then draw the appropriate QW2.0 character.

  For example, to use the cut command, draw a standard Command stroke, and then draw the QW2.0 `x' character, via stroke 3<sub>a</sub>1<sub>a</sub>. To use the paste command, draw a standard Command stroke, and then draw the QW2.0 `p' character, via stroke 3_a9_a.

• A tab character. To draw a tab, stroke 5_a5_n5_a (from the left center zone to the right center zone, and then back again).

• Quick clearing of shift modes. Just tap once in either of the two center zones to clear all shift modes - thereby returning to lowercase mode on the left keyboard, and numeric mode on the right keyboard.

• Extended shift characters. To draw extended characters such as `©' `£' and `µ', draw a shift gesture 2<sub>n</sub>1<sub>n</sub> on the numeric (rightmost) keyboard, and and then draw the stroke for the desired extended character. For example, to draw `£', you would stroke 2_n1_n followed by 7_n4_n.

• All accented characters in the printable Latin-1 character set. If you look at the chart at the top of this document, you'll notice that each punctuation character has the same stroke shape as some letter of the alphabet. For example, `~' and `g' both have stroke shape 6_a7_a.

  To draw an accented character:

  1. draw a base character;
  2. draw the special escape stroke: 2_a6_a;
  3. draw the letter that has the same stroke shape as the accenting character.

  For example, to draw ã, you first stroke an `a' (1<sub>a</sub>), followed by the special escape stroke 2<sub>a</sub>6<sub>a</sub>, and finally the letter `g' (7_a8_a), which indicates `~'.

  In the chart below of available accented characters, the rows list base characters, and the columns list accenting characters.

  To add accent:	`	'	^	~	"	o	?	/
  you draw:	a	n	s	g	f	o	e	r
  after BASE CHAR:
  a or A	à	á	â	ã	ä	å	æ
  c or C							ç
  d or D								ð
  e or E	è	é	ê		ë
  i or I	ì	í	î		ï
  n or N				ñ
  o or O	ò	ó	ô	õ	ö			ø
  p or P								þ
  u or U	ù	ú	û		ü
  y or Y		ý			ÿ

• Well-calibrated plastic insert: We've designed an accurately calibrated plastic insert to fit snugly under the bezel of your PalmPilot, PalmIII or PalmV. The insert provides a complete QW2.0 lexicon, showing all the printable characters.

  To get the most effective use out of QW2.0 we strongly recommend the use of the plastic insert!

  Instructions:

  1. Save and print out to a laser printer the PostScript file which is appropriate for your Palm:

     template_PalmPilot.ps template_PalmIII.ps template_PalmV.ps

     template_PalmPilot.pdf template_PalmIII.pdf template_PalmV.pdf

     (print these with 'fit to page' off)

     onto a sheet of laser-printer safe transparency plastic (I use XEROX 3R3108 removable stripe transparencies).

  2. Cut along the indicated borders, using a straight-edge. To get the best fit, make sure to cut along the middle of each printed line.

  3. Insert under the bezel of your Palm.

Now you're ready to quikwrite!

Incompatibilities with the previous version:

• The following pairs of alphabetic characters have been swapped:
  • Letters `t' and `e' are now to the north and south (strokes 2_a and 8_a, respectively), whereas SPACE and BACKSPACE are now to the east and west (strokes 6_a and 4_a, respectively).
  • Letters `p' and `x'; `p' is now at 3<sub>a</sub>9<sub>a</sub> and `x' is now at 3_a1_a (the mirror image of the stroke for `k', as it is in Graffiti).
  • Letters `l' and `r'; `l' is now at 9_a6_a and `r' is now at 3_a6_a.

• Punctuation characters have been completely rearranged (as per the chart at the top and the plastic insert) to follow a more rational plan.

• The numeric keypad has been rearranged and made more rational. For example. it is much faster to enter phone numbers with QW2.0 than with Graffiti.

Old features which have been deleted:

• The ghostwheel and autocenter features have been removed. These are no longer necessary - or even desirable - since QW2.0 relies on a precalibrated plastic insert in the Graffiti area.